WAVETEK TV

From Enquiry to On-Air: How John Brake Deployed the CC-LINK IP for Wireless IP Camera Control at a Live Stadium Broadcast

The Wavetek CC-LINK IP is a compact 2.4 GHz wireless Ethernet bridge that replaces the cable between an IP-based camera control panel (CyanView, SKAARHOJ, or Sony RCP in IP mode) and a broadcast camera or CCU. It delivers up to 150 Mbps of bidirectional IP data with typical latency under 10 ms at ranges up to 2 km line-of-sight. For broadcast engineers at stadiums and large live venues where running RCP-to-camera control cable is impractical, it provides a stable, encrypted wireless control path that fits into any IP-based production network without specialist RF configuration.

John Brake has worked as a senior freelance broadcast engineer for over twelve years. His work takes him across the UK and Europe, covering Premier League football, international athletics, tennis, and large-scale live entertainment productions. He works primarily with OB companies and production houses that run IP-based camera control workflows, specifying and deploying the technical infrastructure that keeps multi-camera productions on air.

In early 2026, John was engaged by an OB company for a series of live sports productions at a large stadium in England. The brief was straightforward on paper: deliver reliable IP camera control to four camera positions spread across the stadium, with the furthest position sitting approximately 450 metres from the OB compound. The challenge was that two of those positions could not be reached with a cable run without significant infrastructure work, and the production timeline did not allow for it.

This case study follows John from his first enquiry to Wavetek, through the technical specification and purchase of the CC-LINK IP, to its deployment on a live production and the system's performance once on air. It sits within the wider Wavetek wireless camera control range.

Case Study at a Glance

DetailSummary
ClientMr. John Brake, Senior Broadcast Engineer
ProductCC-LINK IP, wireless IP camera control
ProductionLive football productions at a large stadium in England, three match days over six weeks
Control systemCyanView Cy-RCP panels on the production control network
Wireless positionsGantry camera (about 320 m, partial line-of-sight) and pitch-side camera (about 85 m, clear line-of-sight)
ResultNo wireless-related camera control issues across all three events

What Did the Production Need From Wireless IP Camera Control?

The Requirement: IP Camera Control Without the Cable

The production was running a CyanView IP-based camera control system. The vision engineer and shader were working from CyanView Cy-RCP panels connected to the production's control network. All cameras were expected to respond to shading commands in real time, with no discernible latency between the panel adjustment and the camera's response.

For two of the four camera positions, running a physical Ethernet cable from the camera to the OB compound was not operationally viable:

  • Gantry camera, far side of the stadium: the cable route ran through restricted access areas of the stadium structure.
  • Pitch-side camera, behind the goal: the camera sat on a moveable track system where a fixed cable presented a safety hazard.

John had used consumer Wi-Fi solutions on previous productions and found them unreliable in the RF-dense environment of a large stadium. He needed a system built for broadcast use, with managed 2.4 GHz operation, production-grade link reliability, and the ability to pass IP control data transparently, as though the camera were wired directly to the production network.

Finding the CC-LINK IP

John's initial research took him to several wireless broadcast hardware brands. His specific requirement was wireless IP data, not wireless video, for IP-based camera control panels. That narrowed the field considerably, because most wireless broadcast systems on the market are optimised for video transmission.

He found the Wavetek CC-LINK IP through a search for wireless IP camera control broadcast systems. The specification matched his requirement directly: 2.4 GHz OFDM, up to 2 km range, up to 150 Mbps throughput, dual 10/100Base-T Ethernet ports, RS-232/RS-422 serial, WPA2 encryption, and 7.5 to 36 V DC power. At 70 × 50 × 20 mm and 80 g, it was compact enough to mount directly on a camera cage without meaningfully affecting the camera's balance.

"I had been looking for something that did exactly this: wireless IP control, not wireless video. Most of what I found was either video systems with IP control as an afterthought, or consumer Wi-Fi adapters that had no place in a broadcast signal chain. The CC-LINK IP spec page was the first thing I had seen that described my actual workflow." Mr. John Brake, Senior Broadcast Engineer

How Did John Specify and Buy the CC-LINK IP?

Technical Pre-Sales and Specification

Before committing to a purchase, John contacted Wavetek's technical team directly to discuss the deployment specifics. His questions centred on three things:

  • Channel management in a congested 2.4 GHz environment at a large stadium.
  • The realistic working range at the gantry position, which had partial line-of-sight rather than clear line-of-sight.
  • Whether the RS-232/RS-422 serial port could carry lens control data alongside the IP path.

Wavetek's response confirmed the channel management approach (20 MHz bandwidth for spectral efficiency, with the channel selected after a pre-production spectrum scan), provided realistic range guidance for partial line-of-sight conditions, and confirmed that the RS-232/RS-422 port could carry his lens control serial data independently of the IP link, without bandwidth contention.

"The pre-sales conversation was technical from the first exchange. I was not talking to a generalist sales team. I was talking to engineers who understood the RF environment at a stadium and could give me honest guidance on what to expect at 450 metres with partial line-of-sight. That is not a conversation I could have had with most broadcast hardware vendors." Mr. John Brake, Senior Broadcast Engineer

The Purchase Decision and Delivery

John purchased two CC-LINK IP TX/RX pairs, one for the gantry camera and one for the pitch-side camera. The units arrived within the agreed delivery window ahead of the first production date, which left time for a pre-production bench test. He used it to verify the pairing process, confirm WPA2 encryption was set, and check the RS-232/RS-422 port behaviour with his lens control hardware before travelling to the venue.

The bench test confirmed the system operated exactly as the specification described. Pairing was straightforward, because the TX and RX units establish their link on power-up without manual configuration. The RS-232/RS-422 port carried his lens control data cleanly alongside the IP camera control path.

Check The Prices Contact Our Team

How Was the CC-LINK IP Deployed at the Stadium?

Pre-Production: RF Coordination and Channel Selection

The day before the production, John carried out a 2.4 GHz spectrum scan at the stadium using a handheld spectrum analyser. The scan confirmed that channels 1, 6, and 11 were the most occupied, by the stadium's Wi-Fi infrastructure and by other production crew devices. He assigned both CC-LINK IP pairs to channel 9 (20 MHz bandwidth), which showed the lowest occupancy in the scan.

This step takes approximately thirty minutes at a venue, and it is the difference between a wireless system that behaves predictably on a live production and one that degrades under interference. The CC-LINK IP's 20 MHz channel option gave John the channel control he needed to place the system where the RF environment was clear.

Camera Position Installation

At the gantry camera position, the CC-LINK IP transmitter was mounted on the camera cage using a small bracket and powered from the camera's DC accessory rail. The connection was a standard short Ethernet patch from the camera's LAN port to the transmitter's Ethernet input. At the camera end, the RS-232/RS-422 port connected to the lens control unit already installed on the cage.

At the OB truck, the CC-LINK IP receiver was mounted in a small utility rack in the video area and patched into the production's control network via its Ethernet port. The CyanView Cy-RCP connected to the production network as normal. It had no awareness that the gantry camera was on a wireless link rather than a cabled connection.

Link Verification Before Going to Air

With both systems installed, John verified RSSI at both transmitter positions from the OB truck. The gantry position, at approximately 320 metres with partial line-of-sight through the stadium's upper tier, showed a stable RSSI that he considered adequate with margin. The pitch-side position, at approximately 85 metres with clear line-of-sight, showed a strong RSSI.

He then ran the CyanView panels through a full shading exercise on each wireless camera, covering iris from fully open to fully closed, white balance adjustments, and paint corrections, to confirm that control commands were passing through the wireless link without delay or dropout. Both cameras responded identically to the cabled cameras on the production.

"Once I had done the RSSI check and confirmed the shading was responsive, I genuinely could not tell the difference between the wireless cameras and the wired ones from the panel. That is exactly what you need. The vision engineer sitting next to me did not know which cameras were on wireless until I told him." Mr. John Brake, Senior Broadcast Engineer

How Did the CC-LINK IP Perform On Air?

Control Latency in a Live Shading Workflow

The CC-LINK IP's control path latency is typically under 10 ms. In practice, John's vision engineer reported no perceptible difference in shading responsiveness between the wireless cameras and the cabled cameras. Iris adjustments, gain corrections, and white balance changes on the gantry and pitch-side cameras registered as immediate, the kind of response a vision engineer expects from a cabled CCU rather than from a wireless link.

The production ran across three match days over six weeks. On each day, both CC-LINK IP pairs were powered up at the camera positions, the receivers confirmed link status, and the production went to air without any wireless-related camera control issues across all three events.

RF Stability in a Congested Stadium Environment

The 2.4 GHz environment at the stadium on match days was significantly more congested than on the pre-production day. Audience devices, additional broadcast crew, and increased venue Wi-Fi load all contributed. Neither CC-LINK IP pair dropped its link during the live productions.

John attributed this to the channel selection made during the pre-production scan. By assigning the system to the lowest-occupancy channel with 20 MHz bandwidth, the link had sufficient isolation from the dominant interference sources.

The RS-232/RS-422 Port in Use

The CC-LINK IP's RS-232/RS-422 serial port carried lens control data for both wireless camera positions throughout all three productions. No separate wireless system was required for the lens control, because the data path ran over the same wireless link as the IP camera control without any effect on either data stream. For John, this was a meaningful operational simplification: one wireless system per camera position instead of two.

"On match day three, we had the highest 2.4 GHz interference we had seen across the whole run. The system held without a single dropout on either wireless camera. I had been prepared to manage the link more actively if the environment degraded, but I never needed to. That consistency is what you are paying for with a broadcast-grade system versus a consumer Wi-Fi solution." Mr. John Brake, Senior Broadcast Engineer

What Is John Brake's Assessment of the CC-LINK IP?

What Worked

John's overall assessment after three live productions:

  • Link reliability in a congested stadium RF environment exceeded his expectations given the 2.4 GHz operating frequency.
  • Control latency was indistinguishable from a cabled Ethernet connection in practice. The vision engineer and production director noticed no difference.
  • The RS-232/RS-422 port eliminated the need for a second wireless system per camera position, simplifying the installation and reducing the RF footprint.
  • The compact form factor made installation on a camera cage straightforward. The transmitter added negligible weight and did not require re-balancing the camera rig.
  • Power from the camera rail removed battery management from the wireless system, so the transmitter was always live when the camera was live.
  • Pre-sales technical support was detailed and production-specific, not generic.

What to Plan For

John also flagged two things that require preparation before deployment:

  • Pre-production RF scan: 2.4 GHz channel selection cannot be done productively on the day of a live event. A pre-production visit to the venue for a spectrum scan is essential.
  • Antenna positioning at the gantry: at 320 metres with partial line-of-sight, the antenna had to be elevated and aimed carefully. With clear line-of-sight the system is straightforward, but with partial obstructions antenna placement is a variable that needs attention.

"The CC-LINK IP has been on three productions now. It has not given me a single problem that was the system's fault. The problems I could have had were the ones I anticipated and planned for: RF management and antenna placement. Within those parameters, the system does exactly what it says it does, at a price point that is significantly below what comparable broadcast wireless hardware costs. I will be using it again." Mr. John Brake, Senior Broadcast Engineer

CC-LINK IP Technical Specification

ParameterSpecification
Operating frequency2.4 GHz
ModulationOFDM (802.11 b/g/n)
Channel bandwidth20 MHz / 40 MHz
Data throughputUp to 150 Mbps
Wireless rangeUp to 2 km line-of-sight
Control latencyTypically under 10 ms
TX powerUp to 30 dBm
EncryptionWPA2
Ethernet interfaces2 × 10/100Base-T, Auto-MDI/MDIX
Serial interfaceRS-232 / RS-422
Antenna connections2 × RP-SMA
Power supply7.5 to 36 V DC, 2-pin LEMO
Operating temperature-5°C to +40°C
Dimensions70 × 50 × 20 mm
Weight80 g
Price£2,900

Related Wavetek Products

If your production needs a different control protocol, or wireless video from the same camera position, these systems cover the other common workflows:

  • CC-LINK S700: £3,800. Sony 700 serial protocol camera control on 2.4 GHz or 900 MHz, up to 1 km.
  • CC-LINK Combo: £4,200. Sony camera control and IP data together, up to 2 km.
  • FLEX IP: £6,800. HD-SDI wireless video plus IP data, video up to 600 m.
  • FLEX S700: £7,600. Wireless HD video plus Sony 700 serial camera control.
  • FLEX Fusion: £8,500. Wireless HD video plus Sony control plus IP data.

For a deeper comparison of the two control protocols, read our Wireless Camera Control for Broadcast guide and our Wireless Sony RCP Camera Control Guide.

Enquire About the CC-LINK IP

Contact the Wavetek technical team for deployment guidance, range assessments for your specific venue, or a system quotation. You can reach us at info@wavetek.tv or on WhatsApp at +44 (0)7500 071 075.

Frequently Asked Questions

What IP camera control panels are compatible with the Wavetek CC-LINK IP?

The CC-LINK IP is a transparent wireless Ethernet bridge compatible with any IP-based camera control panel using standard Ethernet, including CyanView Cy-RCP, SKAARHOJ RCP Pro and RCPv2, Sony RCP-1500 and RCP-3500 in IP mode, and any other panel or software sending camera control commands over a standard network connection.

What is the maximum range of the Wavetek CC-LINK IP?

The CC-LINK IP is rated to up to 2 km line-of-sight on 2.4 GHz. Real-world range depends on obstructions, antenna placement, and the RF environment at the venue. At John Brake's deployment, the gantry camera at 320 m with partial line-of-sight maintained a stable link throughout three live productions.

Does the CC-LINK IP require frequency coordination or licensing?

The 2.4 GHz ISM band is licence-exempt for this type of equipment in the UK, so no individual Ofcom licence is normally needed. However, 2.4 GHz should always be managed through the production's RF coordination plan. A pre-production spectrum scan to identify clear channels before deployment is strongly recommended at any large broadcast venue.

What is the control latency of the CC-LINK IP?

Typically under 10 ms. In production use, this is imperceptible to vision engineers during shading operations, and control response is consistent with a cabled Ethernet connection.

Can the CC-LINK IP carry video alongside camera control data?

No. The CC-LINK IP carries IP data only. For productions requiring wireless video and wireless camera control from the same camera position, the Wavetek FLEX IP carries HD-SDI video on 5.1 to 5.9 GHz alongside IP data on 2.4 GHz on a single TX/RX pair.

How is the CC-LINK IP secured against unauthorised access?

The CC-LINK IP uses WPA2 encryption on the wireless data path, with the link established by pairing specific TX and RX units. For broadcast production environments, WPA2 provides wireless security consistent with professional network requirements.